Replacing An Mx960 Fpc; Removing An Mx960 Fpc; Figure 148: Attaching A Cable To A Dpc - Juniper MX960 Hardware Manual

Related
Documentation

Replacing an MX960 FPC

Removing an MX960 FPC

Copyright © 2017, Juniper Networks, Inc.

Figure 148: Attaching a Cable to a DPC

Preventing Electrostatic Discharge Damage to an MX960 Router
Holding an MX960 DPC on page 452
Storing an MX960 DPC on page 454
MX960 DPC Terminology
Maintaining MX960 DPCs on page 450
Troubleshooting the MX960 DPCs on page 490
Removing an MX960 FPC on page 361
Installing an MX960 FPC on page 364
When you remove an FPC, the router continues to function, although the PIC interfaces
installed on the FPC being removed no longer function.
An FPC takes up two DPC slots on the MX960 router. Up to six FPCs can be installed
vertically in the front of the MX960 router. The FPCs are hot-insertable and hot-removable.
Chapter 25: Replacing Line Card Components
361