Juniper MX960 Hardware Manual page 290

MX960 3D Universal Edge Router Hardware Guide
Related
Documentation
260
}
}
Commit the configuration to activate it on the router.
16.
[edit]
root@# commit
(Optional) Configure additional properties by adding the necessary configuration
17.
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
When you have finished configuring the router, exit configuration mode.
18.
[edit]
root@host# exit
root@host>
NOTE: To reinstall Junos OS, you boot the router from the removable media.
Do not insert the removable media during normal operations. The router does
not operate normally when it is booted from the removable media.
When the router boots from the storage media (removable media, CompactFlash card,
or hard disk) it expands its search in the
following files in the following order:
(the rescue configuration file), and
When the search finds the first configuration file that can be loaded properly, the file
loads and the search ends. If none of the file can be loaded properly, the routing platform
does not function properly. If the router boots from an alternate boot device, Junos OS
displays a message indication this when you log in to the router.
Powering On an AC-Powered MX960 Router with Normal Capacity Power Supplies
on page 232
Powering On a DC-Powered MX960 Router with Normal Capacity Power Supplies on
page 240
Grounding the MX960 Router on page 226
Routine Maintenance Procedures for the MX960 Router on page 443
/config directory of the routing platform for the
(the main configuration file),
juniper.conf
(the first rollback configuration file).
juniper.conf.1
Copyright © 2017, Juniper Networks, Inc.
rescue.conf