Figure 136: Installing An Ssd In The Routing Engine Re-S-X6-64G - Juniper MX960 Hardware Manual

MX960 3D Universal Edge Router Hardware Guide
342
If only disk1 is replaced:
a. Bring the Routing Engine online by pressing the ONLINE/OFFLINE button.
b. The router boots from disk2 . To be able to boot from disk1:
user@host> request vmhost snapshot partition

Figure 136: Installing an SSD in the Routing Engine RE-S-X6-64G

1— Carrier
Copying vmhost and Junos OS from an USB disk when both the SSDs are replaced
together:
NOTE: To prepare a bootable USB disk, see
for RE-MX-X6, RE-MX-X8 and RE-PTX-X8 Routing Engines
Insert the USB disk in the
1.
After the Routing Engine boots from the USB, press
2.
confirm
Install vmhost and Junos software on Primary and Secondary disk [y/N]?
the console.
After the installation is completed, press y when prompted to confirm
3.
to reboot from the SSD disk.
[y/N]?
Copying vmhost and Junos OS to the SSDs from the PXEBoot server:
Set up the PXEBoot server. See Copying VM Host Installation Package to the PXE Boot
1.
Server.
Bring the Routing Engine online by pressing the
2.
During the boot, when you see the message
3.
to enter into the BIOS menu boot options.
2— SSD card
Creating an Emergency Boot Device
slot on the Routing Engine.
USB
ONLINE/OFFLINE
Press Esc for boot options
.
y when you are prompted to
Reboot now?
button.
press Esc key
Copyright © 2017, Juniper Networks, Inc.
on