Connecting The Mx960 Router To The Network; Tools And Parts Required For Mx960 Router Connections; Connecting The Mx960 Router To Management And Alarm Devices - Juniper MX960 Hardware Manual

CHAPTER 18
Connecting the MX960 Router to the
Network

Tools and Parts Required for MX960 Router Connections

Related
Documentation

Connecting the MX960 Router to Management and Alarm Devices

Copyright © 2017, Juniper Networks, Inc.
Tools and Parts Required for MX960 Router Connections on page 247
Connecting the MX960 Router to Management and Alarm Devices on page 247
Connecting the MX960 Router to a Network for Out-of-Band Management on page 250
Connecting the MX960 Router to a Management Console or Auxiliary Device on page 251
Connecting an MX960 Router to an External Alarm-Reporting Device on page 252
Connecting DPC, MPC, MIC, or PIC Cables to the MX960 Router on page 253
Connecting the Alarm Relay Wires to the MX960 Craft Interface on page 255
To connect the router to management devices and line cards, you need the following
tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (–) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Electrostatic discharge (ESD) grounding wrist strap
Connecting the MX960 Router to a Network for Out-of-Band Management on page 248
Connecting the MX960 Router to a Management Console or Auxiliary Device on page 248
Connecting an MX960 Router to an External Alarm-Reporting Device on page 249
Connecting the MX960 Router to a Network for Out-of-Band Management on page 248
Connecting the MX960 Router to a Management Console or Auxiliary Device on page 248
Connecting an MX960 Router to an External Alarm-Reporting Device on page 249
247