Juniper MX960 Hardware Manual page 197

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
WARNING:
Translation from Japanese: The attached power cable is only for this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). You can order AC power cords that are in
compliance.
WARNING: The router is a pluggable type A equipment installed in restricted
access location. It has a separate protective earthing terminal (Metric [–M6]
and English [–¼-20] screw ground lugs) provided on the chassis in addition
to the grounding pin of the power supply cord. This separate protective earth
terminal must be permanently connected to earth.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
MX960 AC Power Supply Description on page 98
Connecting Power to an AC-Powered MX960 Router with Normal-Capacity Power
Supplies on page 227
Replacing an MX960 AC Power Supply Cord on page 403
Chapter 12: AC Power Requirements, Specifications, and Guidelines
167