Mx960 Ac Power Supply Leds; Table 56: Ac Power Supply Leds - Juniper MX960 Hardware Manual

MX960 AC Power Supply LEDs

Table 56: AC Power Supply LEDs

Label Color
Green
AC OK
Green
DC OK
PS FAIL Red
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Calculating Power Requirements for MX960 Routers on page 161
Power Requirements for an MX960 Router on page 152
AC Power Circuit Breaker Requirements for the MX960 Router on page 165
AC Power Cord Specifications for the MX960 Router on page 165
Site Electrical Wiring Guidelines for MX Series Routers
Connecting Power to an AC-Powered MX960 Router with Normal-Capacity Power
Supplies on page 227
Connecting Power to an AC-Powered MX960 Router with High-Capacity Power Supplies
on page 229
MX960 Power Supply LEDs on the Craft Interface on page 17
Each AC power supply faceplate contains three LEDs that indicate the status of the
power supply (see Table 56 on page
two LEDs on the craft interface In addition, a power supply failure triggers the red alarm
LED on the craft interface.
State Description
Off AC power applied to power supply is not within the normal operating range.
On AC power applied to power supply is within the normal operating range.
Off DC power outputs generated by the power supply are not within the normal
operating ranges.
On DC power outputs generated by the power supply are within the normal operating
ranges.
Off Power supply is functioning normally.
On Power supply is not functioning normally. Check
information.
MX960 Chassis Description on page 9
MX960 Power System Overview on page 97
MX960 AC Power Supply Description on page 98
Chapter 7: Power System Components and Descriptions
103). The power supply status is also reflected in
AC OK
and LEDs for more
DC OK
103