Safety And Compliance Information; General Safety Guidelines And Warnings - Juniper MX960 Hardware Manual

CHAPTER 35

Safety and Compliance Information

General Safety Guidelines and Warnings

General Safety Guidelines and Warnings
Copyright © 2017, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 529
Installation and Maintenance Safety Guidelines and Warnings on page 534
Radiation and Laser Warnings on page 541
Maintenance and Operational Safety Guidelines and Warnings on page 544
Electrical Safety Guidelines and Warnings on page 549
Agency Approvals and Compliance Statements on page 561
General Safety Guidelines and Warnings on page 529
Definitions of Safety Warning Levels on page 530
Qualified Personnel Warning on page 532
Fire Safety Requirements on page 533
Warning Statement for Norway and Sweden on page 534
The following guidelines help ensure your safety and protect the device from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in the hardware documentation for
this device. Make sure that only authorized service personnel perform other system
services.
Keep the area around the device clear and free from dust before, during, and after
installation.
Keep tools away from areas where people could trip over them while walking.
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
become caught in the device.
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
529