Holding An Mx960 Fpc - Juniper MX960 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX960:

Table of Contents

Documentation

Holding an MX960 FPC

user@host> show chassis fpc pic-status

An FPC takes up two DPC slots when installed on an MX Series

router. The slot number corresponds to the lowest numbered DPC slot.

For further description of the output from the command, see the

MX960 Flexible PIC Concentrator (FPC) LEDs on page 65

Troubleshooting the MX960 FPCs on page 492

Replacing an MX960 FPC on page 361

Holding an MX960 FPC on page 457

Storing an MX960 FPC on page 461

Many components on the FPC are fragile. Failure to handle FPCs

as specified in this document can cause irreparable damage.

An FPC configured with PICs installed can weigh as much as

18 lb (8.2 kg). Be prepared to accept the full weight of the FPC as you lift it.

To prevent damage when handling or carrying FPCs:

As you carry the FPC, do not bump it against anything. FPC components

are fragile.

Do not grasp the FPC anywhere except places that this document indicates.

In particular, never grasp the connector edge, especially at the power

connector in the corner where the connector and bottom edges meet (see

Figure 174 on page

DPC 40x 1GE R

10x 1GE(LAN)

MX FPC Type 3

1x OC-192 SONET

Chapter 29: Maintaining Components

CLI Explorer

Show Quick Links

Table of Contents