CHAPTER 2
MX960 Release Notes
Outstanding Issues with the MX960 Router
Copyright © 2017, Juniper Networks, Inc.
Outstanding Issues with the MX960 Router on page 5
Errata with the MX960 Router Documentation on page 7
This topic lists outstanding hardware issues with the MX960 3D Universal Edge router.
For information about software issues, see the Junos OS Release Notes.
Each MX960 high capacity AC power supply has an input mode switch, covered by a
small metal plate. The input mode switch tells the system the number of feeds it should
expect When the input mode switch is set to '0' (zero): expect one feed, an alarm will
be generated if two are providing power. When the input mode swtich is set to '1' (one):
expect two feeds, an alarm will be generated if less than two feeds are active. The
default setting is 1.
In Junos OS Releases 10.1R2 and 10.2R1. there are scenarios in which both the supply
and the system will generate a warning or alarm, and there is at least one scenario
where the supply is OK and the system will still give a warning message. [PR530872]
5