Errata With The Mx960 Router Documentation - Juniper MX960 Hardware Manual

Related
Documentation

Errata with the MX960 Router Documentation

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
These scenarios raise an
consumption. To clear the alarm, perform one of the following actions:
To temporarily take the DPC offline, use the
command from the CLI.
offline
NOTE: The router does not preserve the state after a reboot.
To take the DPC offline and preserve the state after a reboot, use the
slot-number power off
Remove the powered-off DPC from the MX960 router.
Juniper Networks also recommends the following best practices:
Use all other slots before using slot
Remove any unused DPCs plugged into the MX960 chassis.
Errata with the MX960 Router Documentation on page 7
This topic lists outstanding documentation issues:
There are no outstanding documentation issues at this time.
Outstanding Issues with the MX960 Router on page 5
red alarm due to the DPC's high power
FPC misconfiguration
request chassis fpc slot slot-number
command from configuration mode.
.
6
Chapter 2: MX960 Release Notes
set chassis fpc
7