Re-C2600 Boot Sequence; Tx Matrix Plus Re-C2600 Leds; Figure 12: Re-C2600 Compactflash Card And Solid-State Disk Slots - Juniper TX MATRIX PLUS Hardware Manual

TX Matrix Plus Router Hardware Guide
Related
Documentation

TX Matrix Plus RE-C2600 LEDs

28

Figure 12: RE-C2600 CompactFlash Card and Solid-State Disk Slots

RE-C2600 Boot Sequence

The RE-C2600 boots from the storage media in this order: the USB device (if present),
the CompactFlash card
CF
present) in slot 2 , then the LAN.
SSD2
NOTE: is not currently supported.
SSD2
Providing Power to a Seven-Input 420-A Power Supply on page 167
Maintaining the TX Matrix Plus Routing Engines on page 268
Troubleshooting the TX Matrix Plus Host Subsystem on page 311
Troubleshooting the TX Matrix Plus Routing Engines on page 312
Four LEDs— ONLINE , CF , SSD1
Figure 13 on page 29 and Table 15 on page 39).
(if present), the disk (if present) in slot 1
, and SSD2 —indicate the status of the RE-C2600 (see
, the disk (if
SSD1
Copyright © 2010, Juniper Networks, Inc.