Scbe2-Mx Description - Juniper MX960 Hardware Manual

Related
Documentation

SCBE2-MX Description

Copyright © 2017, Juniper Networks, Inc.
Table 61: MX SCBE LEDs (continued)
Label Color
Green
BITS
Red
–
Green
GPS
Red
–
Green
UTI
Red
–
MX960 SCBE Description on page 110
MX960 Host Subsystem Description on page 27
Upgrading an MX960 SCB to SCBE on page 413
The SCBE2-MX features the third-generation fabric on the MX960, MX480, and MX240
routers. It uses the XF2 ASIC fabric chip, providing support for higher interface density
(slot and capacity scale) as well as improved services. The SCBE2-MX was released with
Junos release 13.3R1.
The SCBE2-MX is installed vertically in the MX960 chassis and horizontally in the MX480
and MX240 chassis. The routing engine is installed directly into a slot on the SCBE2-MX
(see Figure 40 on page 114).
Chapter 8: Switch Fabric Components and Descriptions
State Description
On steadily Building-integrated timing supply (BITS) clocking
interface is active.
On steadily BITS clocking interface has failed.
Off BITS clocking interface is offline.
On steadily Global positioning system (GPS) clocking interface
is active.
On steadily GPS clocking interface has failed.
Off GPS clocking interface is offline.
On steadily Universal Timing Interface (UTI) clocking interface
is active.
On steadily UTI clocking interface has failed.
Off UTI clocking interface is offline.
113