Action To Take After An Electrical Accident; Agency Approvals And Compliance Statements; Agency Approvals And Compliance Statements For The Mx2010 Router; Agency Approvals For Mx2010 Routers - Juniper MX960 Hardware Manual

Action to Take After an Electrical Accident

Related
Documentation

Agency Approvals and Compliance Statements

Agency Approvals and Compliance Statements for the MX2010 Router

Copyright © 2017, Juniper Networks, Inc.
If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
1.
injury.
Disconnect power from the device.
2.
If possible, send another person to get medical aid. Otherwise, assess the condition
3.
of the victim, then call for help.
General Safety Guidelines and Warnings on page 529
General Electrical Safety Guidelines and Warnings on page 550
AC Power Electrical Safety Guidelines on page 552
DC Power Electrical Safety Guidelines for Switches
Agency Approvals and Compliance Statements for the MX2010 Router on page 561
Compliance Statements for EMC Requirements for Juniper Networks Devices on page 564
Compliance Statements for Environmental Requirements for Juniper Networks
Devices on page 565
Compliance Statements for NEBS on page 565
Agency Approvals for MX2010 Routers on page 561
Compliance Statements for NEBS for the MX2010 Router on page 562
Compliance Statements for EMC Requirements for the MX2010 Router on page 563
Compliance Statements for Environmental Requirements for Juniper Networks
Devices on page 564

Agency Approvals for MX2010 Routers

The routers comply with the following standards:
Safety
CAN/CSA-22.2 No. 60950-00/UL 1950 Third Edition, Safety of Information
Technology Equipment
EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification, Requirements
and User's Guide
Chapter 35: Safety and Compliance Information
561