Replacing An Mx960 As Mlc; Removing An Mx960 As Mlc; Figure 117: Cable Connector; Figure 118: Ethernet Port - Juniper MX960 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX960:

Table of Contents

Documentation

Replacing an MX960 AS MLC

Plug one end of the replacement cable into the

shows the port.

Plug the other end of the cable into the network device.

Preventing Electrostatic Discharge Damage to an MX960 Router

Routing Engine Interface Cable and Wire Specifications for MX Series Routers on

Replacing the Console or Auxiliary Cable on an MX960 Router on page 311

Replacing an MX960 Routing Engine on page 333

Removing an MX960 AS MLC on page 313

Installing an MX960 AS MLC on page 316

When you remove an Application Services Modular Line Card (AS MLC), the router

continues to function, although the modular cards (AS MXC and AS MSC) installed on

the AS MLC being removed no longer function.

Up to eight AS MLCs can be installed vertically in the front of the MX960 router. The AS

MLCs are hot-insertable and hot-removable. An empty AS MLC weighs 10.5 lb (4.76 kg).

A fully configured AS MLC can weigh up to 15.27 lb (6.93 kg). Be prepared to accept its

full weight.

Chapter 22: Replacing Chassis Components

Figure 118 on page 313

Show Quick Links

Table of Contents