Mitsubishi Electric QD75MH1 User Manual page 778

APPENDICES
Keep the cap for SSCNET
in a plastic bag with a zipper of SSCNET
Do not see directly the light generated from SSCNET
When the light gets into eye, may feel something is wrong for eye.
(The light source of SSCNET
When changing the servo amplifier or QD75MH, make sure to put cap on SSCNET
When asking repair of servo amplifier for some troubles, make sure to put a cap on SSCNET
connector.
When the connector is not put a cap, the light device may be damaged at the transit.
In this case, exchange and repair of light device is required.
Model
name MR-J3BUS015M
Item
Cable length 0.15m(0.49ft.)
Model
name
Item
Cable length
Model
name
Item
Cable length
!
connector and the tube for protecting light code end of SSCNET
corresponds to class1 defined in JISC6802 or JEC60825-1.)
(2) Cable specification
(a) MR-J3BUS M
MR-J3BUS03M
0.3m(0.98ft.)
(b) MR-J3BUS M-A
MR-J3BUS5M-A
5m(16.40ft.)
(c) MR-J3BUS M-B
MR-J3BUS30M-B
30m(98.43ft.)
CAUTION
able to prevent them from becoming dirty.
connector of servo amplifier or QD75MH.
MR-J3BUS05M
0.5m(1.64ft.)
MR-J3BUS10M-A
10m(32.81ft.)
MR-J3BUS40M-B
40m(131.23ft.)
Appendix - 29
MELSEC-Q
connector.
MR-J3BUS1M MR-J3BUS3M
1m(3.28ft.) 3m(9.84ft.)
MR-J3BUS20M-A
20m(65.62ft.)
MR-J3BUS50M-B
50m(164.04ft.)
cable