Mitsubishi Electric QD75MH1 User Manual page 266

5 DATA USED FOR POSITIONING CONTROL
Set with a decimal.
Setting
value
The QD75MH resets the value to "0" automatically
when processing of the step start request completes.
Set with a decimal.
Setting
K
value
The QD75MH resets the value to "0" automatically
when processing of the skip request completes.
Set with a decimal.
Setting
K
value
Set with a decimal.
Setting value
Set with a decimal.
Setting
K
value
Setting value
K
Step start information
1: Continues step opration
2: Restarts operation
1
Skip request
1: Issues a skip request to have
the machine decelerate, stop,
and then start the next positioning
operation.
Teaching data selection
0: Takes the current feed value as a positioning
address.
1: Takes the current feed value as an arc data.
K
ABS direction in degrees
0: Takes a shortcut.
(Specified direction ignored.)
1: ABS circular right
2: ABS circular left
Teaching
positioning
data No.
1 to 600
5 - 169
MELSEC-Q
Storage buffer
Default
memory address
value
Axis 1 Axis 2 Axis 3 Axis 4
0 1546 1646 1746 1846
0 1547 1647 1747 1847
0 1548 1648 1748 1848
0 1549 1649 1749 1849
0 1550 1650 1750 1850