5 DATA USED FOR POSITIONING CONTROL
Storage item
Deceleration start flag
Md.48
OPR re-travel value
Md.100
Real current value
Md.101
Deviation counter value
Md.102
Motor rotation speed
Md.103
Motor current value
Md.104
•
"1" is stored when the constant speed status or acceleration status switches to
the deceleration status during position control whose operation pattern is
"Positioning complete".
•
"0" is stored at the next operation start or manual pulse generator operation
enable.
POINT
This parameter is possible to monitor when "
" is valid.
•
This area stores the travel distance during the OPR travel to the zero point that
was executed last time.
For setting units
•
Update timing: 1.7ms
Example) mm
(Buffer memory
•
This area stores the present value (feed present value – deviation counter droop
pulses).
•
Update timing: 1.7ms
Example) mm
(Buffer memory
•
This area stores the difference between the feed present and the actual present
value.
(Buffer memory details) PLS
•
Update timing: 1.7ms
•
This area stores the present rotation speed of the servomotor.
(Buffer memory
0.1) rpm
•
Update timing: 1.7ms
•
This area stores the present motor current value of the motor.
(Buffer memory
0.1) %
•
Update timing: 1.7ms
5 - 142
Storage details
Deceleration start flag valid
Cd.41
0.1) µm
0.1) µm
MELSEC-Q