Mitsubishi Electric QD75MH1 User Manual page 164

5 DATA USED FOR POSITIONING CONTROL
Setting Value, setting range
Value set with peripheral device
Servo amplifier setting invalid
( : Valid, : Invalid)
MR-J3-B
2: The PA corresponds with servo parameter No. of the servo amplifier.
3: Set the parameter value and switch power off once (The parameter is transferred to servo amplifier from QD75MH), then switch it
on again to make that parameter setting valid.
Value set with PLC program
0 to 1
1 to 65535
5 - 67
MELSEC-Q
Setting value buffer memory
address
Default
value
Axis 1 Axis 2 Axis 3 Axis 4
0 30114 30314 30514 30714
4000 30115 30315 30515 30715