Performance Specifications - Mitsubishi Electric QD75MH1 User Manual

Type qd75mh positioning module
Table of Contents

Advertisement

3 SPECIFICATIONS AND FUNCTIONS

3.1 Performance specifications

Item
No. of control axes
Interpolation function
Control system
Control unit
Positioning data
Backup
Positioning system
Positioning range
Positioning
Speed command
Acceleration/
deceleration process
Acceleration/
deceleration time
Sudden stop
deceleration time
1 : In speed-position switching control (ABS mode), the control unit available is "degree" only. (For details, refer to "Section 9.2.17 Speed-
position switching control (ABS mode)".)
2: Using the "Pre-reading start function", the virtual start time can be shortened. (For details, refer to "Section 12.7.8 Pre-reading start
function".)
3 : When "Speed control 10 x multiplier setting for degree axis function" is valid, this will be the setting range 0.01 to 20000000.00
(degree/min). (For details, refer to "Section 12.7.11 Speed control 10 x multiplier setting for degree axis function".)
Model
QD75MH1
1 axis
None
PTP (Point To Point) control, path control (both linear and arc can be set), speed control, speed-
position switching control, position-speed switching control
mm, inch, degree, PLS
600 data (positioning data Nos. 1 to 600)/axis
(Can be set with peripheral device or PLC program.)
Parameters, positioning data, and block start data can be saved on flash ROM
(battery-less backup)
PTP control:
Speed-position switching control:
Position-speed switching control:
Path control:
In absolute system
• –214748364.8 to 214748364.7 (µm)
• –21474.83648 to 21474.83647 (inch)
• 0 to 359.99999 (degree)
• –2147483648 to 2147483647 (PLS)
In incremental system
• –214748364.8 to 214748364.7 (µm)
• –21474.83648 to 21474.83647 (inch)
• –21474.83648 to 21474.83647 (degree)
• –2147483648 to 2147483647 (PLS)
In speed-position switching control (INC mode) / position-speed switching control
• 0 to 214748364.7 (µm)
• 0 to 21474.83647 (inch)
• 0 to 21474.83647 (degree)
• 0 to 2147483647 (PLS)
In speed-position switching control (ABS mode)
• 0 to 359.99999 (degree)
0.01 to 20000000.00 (mm/min)
0.001 to 2000000.000 (inch/min)
0.001 to 2000000.000 (degree/min)
1 to 50000000 (PLS/s)
Automatic trapezoidal acceleration/deceleration, S-pattern acceleration/deceleration
1 to 8388608 (ms)
Four patterns can be set for each of acceleration time and deceleration time
1 to 8388608 (ms)
QD75MH2
2 axes
2-axis linear interpolation
2-axis circular interpolation
Incremental system/absolute system
Incremental system/absolute system 1
Incremental system
Incremental system/absolute system
1
3
3 - 2
MELSEC-Q
QD75MH4
4 axes
2-, 3-, or 4-axis linear
interpolation
2-axis circular interpolation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qd75mh2Qd75mh4

Table of Contents