Mitsubishi Electric QD75MH1 User Manual page 182

5 DATA USED FOR POSITIONING CONTROL
Setting Value, setting range
Value set with peripheral device
Servo amplifier setting invalid
( : Valid, : Invalid)
MR-J3-B
2: The PC corresponds with servo parameter No. of the servo amplifier.
3: Set the parameter value and switch power off once (The parameter is transferred to servo amplifier from QD75MH), then switch it
on again to make that parameter setting valid.
Value set with PLC program
0 to D
-999 to 999
-999 to 999
0 to 1
5 - 85
MELSEC-Q
Setting value buffer memory
address
Default
value
Axis 1 Axis 2 Axis 3 Axis 4
1 30173 30373 30573 30773
H
0 30174 30374 30574 30774
0 30175 30375 30575 30775
0 30180 30380 30580 30780