Mitsubishi Electric QD75MH1 User Manual page 367

8 OPR CONTROL
OPR sub functions
Refer to Section 3.2.4 "Combination of QD75MH main functions and sub functions" for
details on "sub functions" that can be combined with OPR control. Also refer to Chapter
12 "Control sub functions" for details on each sub function.
[Remarks]
The following two sub functions are only related to machine OPR.
Sub function name
OPR retry function
OP shift function
: Combination possible,
When an OPR is not required
Control can be carried out ignoring the "OPR request flag" (
systems that do not require an OPR.
In this case, the "OPR parameters (
values or a value at which an error does not occur.
OPR from peripheral devices
"Machine OPR" and "fast OPR" can be executed from the test mode of the peripheral
device.
Refer to GX Configurator-QP Operating Manual for details on OPR from the peripheral
device.
Machine OPR
: Restricted, : Combination not possible
Pr.43 Pr.57
to
8 - 4
MELSEC-Q
Fast OPR Reference
Section 12.2.1
Section 12.2.2
Md.31
Status: b3) in
)" must all be set to their initial