Mitsubishi Electric QD75MH1 User Manual page 347

7 MEMORY CONFIGURATION AND DATA PROCESS
Buffer memory area configuration
Servo parameter area
Use of address Nos. skipped above is prohibited. If used, the system may not operate correctly.
POINT
When the parameter of the servo amplifier side is changed, it is transmitted to the servo memory area
in the buffer memory after the QD75MH is read automatically with parameters.
(1) When changing the servo parameters by the auto tuning.
(2) When the servo parameter is changing after the MR-configurator is connected directly with the servo
amplifier.
Basic setting parameter area
Gain • filter setting parameter
area
Expansion setting parameter
area
Input/output setting parameter
area
Buffer memory address
Axis 1 Axis 2
30100 to 30300 to
30115 30315
30119 to 30319 to
30152 30352
30164 to 30364 to
30184 30384
30202 to 30402 to
30204 30404
7 - 6
MELSEC-Q
Axis 3 Axis 4
30500 to 30700 to
30515 30715
30519 to 30719 to
30552 30752
30564 to 30764 to
30584 30784
30602 to 30802 to
30604 30804
Writing
possibility
Possible