Toshiba e-STUDIO 2555C Service Manual page 1440

Sub
05/08 Mode Element
element
08 Setting System General Control method
Mode switchover of
decelerating at low
temperature
08 Setting System General
Mode
08 Setting System General
Mode
08 Setting System FAX
Mode
08 Setting System User
Mode interface
Item Subitem Code
8666
8667
8668
8700
8704
Sub- Default Acceptable
Details
code value value
Alternating ejection 0 0-1
(R-size/non-R-size)
Saving image log 0 0-1
Number of pages 1 0-1
saved as image log
Secret reception 0 0-2
setting
Email/FAX address 0 0-1
restriction
203
RAM Contents
SYS Sets whether the decelerating control at low
temperature for alternating ejection (R-size/non-R-size)
is always applied or applied depending on the paper
size. Set the value of this code to "1" to print non-R-size
paper in the normal speed when the number of sheets
in each copy is large. The performance may decrease
when the value is set to "1" due to the processing speed
control at the alternation of ejection.
0: Always applies decelerating control at low
temperature
1: Judges whether decelerating control at low
temperature is applied depending on the paper size
SSDK 0: Disabled 1: Enabled
SSDK 0: First page
1: All pages
SYS When the value of 08-8924 is "0", the value of this code
can be set to "1" or "2".
0: Always Off
1: Always On
2. Scheduled reception
SYS 0: No restriction
1: Search for external LDAP only
Use this code to restrict address of emal/fax to specified
LDAP server. If the value of this code is set to "1", the
addresses of emal/fax are restricted to the LDAP server
specified with TopAccess, and the direct input of
addresses and selecting addresses from the local
address book are not available. If the value of this code
is set to "1", this setting is given priority over the setting
value of 08-9299, 08-3848, 08-3849.
Proce Servic
dure e UI
1
1
1
1
1