Toshiba e-STUDIO 2555C Service Manual page 1483

Sub
05/08 Mode Element
element
08 Setting System Paper Paper information
mode feeding
08 Setting System Paper Paper information
mode feeding
08 Setting System Paper Paper information
mode feeding
08 Setting System Paper Size conversion
mode feeding
08 Setting System Network Print
Mode
Item Subitem Code
9303
9304
9305
9306
Retention period 9307
Sub- Default Acceptable
Details
code value value
PFP 2 0 0-8
LCF 0 0-8
Bypass tray 0 0-160
LT <-> A4 / LD <-> A3 0 0-1
Storage period at trail 14 0-53
and private
246
RAM Contents
SYS 0: Plain paper
1: Thick paper 1
2: Thick paper 2
3: Thick paper 3
8: Recycled paper
* Only 0 to 3, 8 are acceptable.
* Do not set the paper type that is not supported.
SYS 0: Plain paper
8: Recycled paper
* Only 0 and 8 are acceptable.
* Do not set the paper type that is not supported.
SYS 0: Plain paper 1: Thick paper 1 2: Thick paper 2 3:
Thick paper 3 4: Thick paper 4 6: Special paper 1 7:
Special paper 2 8: Recycled paper 11: Thin paper 12:
Special paper 3 16: OHP film 32: Envelope 128: Plain
paper (reverse) 129: Thick paper 1 (reverse) 130:
Thick paper 2 (reverse) 131: Thick paper 3 (reverse)
132: Thick paper 4 (reverse) 134: Special paper 1
(reverse) 135: Special paper 2 (reverse) 136:
Recycled paper (reverse) 139: Thin paper (reverse)
140: Special paper 3 (reverse) 160: Envelope (reverse)
* 0-4, 6-8, 11, 12, 16, 32, 128-132, 134-136, 139, 140,
and 160 are acceptable.
* Do not set the paper type that is not supported.
SYS Sets whether the data is printed on the different but
similar size paper or not when the paper of
corresponding size is not available.
0: Valid (The data is printed on A4/A3 when LT/LD is
selected or vice versa.)
1: Invalid (The message to use the selected paper size
is displayed.)
SYS 0: No limits
1 to 30: 1 to 30 days
31: 1 hour 32: 2 hours 33: 4 hours 34: 8 hours 35: 12
hours 50: 5 min. 51: 10 min. 52: 15 min. 53: 30 min.
Proce Servic
dure e UI
1
1
1
1
1 Yes