Edge-Core ECS4810-12M Layer 2 Management Manual page 8

A T G
BOUT HIS UIDE
◆ Added description of RA Guard parameters under
Interface Settings" on page
◆ Added the section "Configuring DHCP Relay Service" on page
◆ Added description of Type and Expire parameters under
Static Interfaces for a Multicast Router" on page
◆ Updated description of parameters under
Discovered by IGMP Snooping" on page
◆ Added the section "Multicast VLAN Registration for IPv6" on page
◆ Added the commands
status" on page 695.
◆ Added the commands
software" on page 702.
◆ Modified syntax of the command
◆ Added the command
upgrade" on page 713.
◆ Added the section "TFTP Configuration Commands" on page
◆ Added the command
◆ Updated syntax for
◆ Added the section "Synchronous Ethernet" on page
◆ Added the command
page 785.
◆ Changed command set for
◆ Added the section "PPPoE Intermediate Agent" on page
◆ Added the command
page 895 and "clear ip dhcp snooping binding" on page
◆ Added the command
◆ Removed "tos" parameter from the command
IPv4 ACL)" on page
◆ Added "counter" parameter to the commands
page 930, "ipv6 access-group" on page
on page 941.
◆ Added the command
page 946.
– 8 –
568.
"Displaying Multicast Groups
614.
"show alarm" on page 694
"show watchdog" on page 702
"delete" on page
"upgrade opcode reload" on page 713
"terminal" on page 724.
"logging host" on page
"memory" on page 784
"Flow Sampling Commands" on page
"ip dhcp snooping information option circuit-id" on
"dos-protection tcp-udp-port-zero" on page
928.
936, and
"clear access-list hardware counters" on
"Configuring IPv6
592.
"Specifying
604.
641.
and "show alarm-
and "watchdog
708.
and "show
713.
728.
748.
and "process cpu" on
795.
854.
897.
916.
"permit, deny (Extended
"ip access-group" on
"mac access-group"