Figure 174: Setting The Name Of A Time Range - Edge-Core ECS4810-12M Layer 2 Management Manual

W I
EB NTERFACE
To configure a time range:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Add from the Action list.
3.
Enter the name of a time range.
4.
Click Apply.
5.

Figure 174: Setting the Name of a Time Range

To show a list of time ranges:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Show from the Action list.
3.
Figure 175: Showing a List of Time Ranges
To configure a rule for a time range:
Click Security, ACL.
1.
Select Configure Time Range from the Step list.
2.
Select Add Rule from the Action list.
3.
Select the name of time range from the drop-down list.
4.
Select a mode option of Absolute or Periodic.
5.
– 323 –
| Security Measures
C 14
HAPTER
Access Control Lists