Configuring an IES Service with CLI
Deleting a Spoke-SDP
To delete the spoke SDP from the service interface must be shut it first. This cleans up the
associated VC labels.
Use the following CLI syntax to delete a spoke SDP from an interface:
CLI Syntax: config>service# ies service-id [customer customer-id] [vpn
vpn-id]
The following example displays the spoke SDP configuration.
A:ALA-48>config>service>ies# info
----------------------------------------------
----------------------------------------------
A:ALA-48>config>service>ies#
Page 894
interface ip-int-name
[no] spoke-sdp sdp-id:vc-id
shutdown
description "to internet"
interface "spokeSDP-test" create
exit
no shutdown
7750 SR OS Services Guide