Route-Map - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands

route-map

To specify a route map, use the route-map command. To return to the default value, use the no form of
this command.
Syntax Description
map-tag
Command Default None
Command Modes Route-map configuration mode (config-route-map)
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to specify a route map:
switch# configure terminal
switch(config)# route-map PBR
switch(config-route-map)#
Related Commands Command
auto ip sla
mpls-lsp-monitor
OL-27555-03
route-map map-tag
no route-map map-tag
Route map name. The maximum size is 63 characters.
Modification
This command was introduced.
Description
Begins the configuration for an IP SLAs LSP Health Monitor operation and
enters auto IP SLA MPLS configuration mode.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
route-map
1-35