Location 15: Configuration, Update - Sirona Orthophos XG 3D Ceph Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
Error code Description
E7 15 01 Wrong memory modules.
Error code Description
E7 15 02 Wrong module constellation for this
unit.
Incompatible modules were used.
Error code Description
E7 15 03 Wrong software constellation of
modules.
Error code Description
E6 15 04 Product activation keys invalid or
not available.
Occurs after replacement of tube
assembly (DX6) or board DX11 and
possibly after software updates.
See also the section titled Measures
following replacement of boards
[ → 432].
Error code Description
E6 15 05 Unit serial number invalid or not
available.
Occurs during first power-on after
replacement of board DX6 or DX11.
See also the section titled Measures
following replacement of boards
[ → 432].
63 03 510 D3352
D3352.076.03.11.02 09.2016
5.5.8

Location 15: Configuration, update

Actions required
E7 15 01: XG 3D
If a DRAM memory module is plugged into
board DX11 ...
● Replace memory module or DX11.
If no DRAM memory module is plugged into
board DX11 ...
● Replace board DX11.
Actions required
E7 15 02 XG 3D
● Refer to list of software versions.
● Check to make sure the correct modules
are installed (e.g. after replacing
modules).
● Run software update.
If the error occurs repeatedly...
● Contact the Sirona Customer Service
Center (CSC)
Actions required
E7 15 03
● Check the software versions of the unit (on
the info screen or by running service
routing S008.2), and run or repeat
software update or downgrade if
necessary.
Actions required
E6 15 04
● Enter release key.
*) OI = Operating instructions
Actions required
E6 15 05
● Run service routine S008.3 and confirm or
enter the unit serial number on the unit.
5 Messages
5.5 List of error messages
see
S. [ → 435]
S. [ → 435]
see
S. [ → 49],
S. [ → 368],
S. [ → 62]
see
S. [ → 286],
S. [ → 62]
see
see OI*
see
S. [ → 286]
129