Location 61: Diaphragm Control, Board Dx61 - Sirona Orthophos XG 3D Ceph Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
Error code Description
E6 61 01 General error during module
initialization
Error code Description
E6 61 02 Invalid system data or uninitialized
module storage data
Error code Description
E6 61 03 Invalid commanding or control data.
This error may also occur in
connection with other causal error
messages! Please also observe the
causal error message! It appears
only after you acknowledge the first
error message.
Error code Description
E6 61 04 Data transfer error or dialog error to
module (master side)
63 03 510 D3352
D3352.076.03.11.02 09.2016
5.5.10

Location 61: Diaphragm control, board DX61

Actions required
E6 61 01
● Please contact the Sirona Customer
● Check board DX61, replace board DX61
Actions required
E6 61 02
● Please contact the Sirona Customer
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Check board DX61, replace board DX61
Actions required
E6 61 03
If the error occurs during the acceptance/
constancy test...
● Check filter offset B
For software versions ≤ V02.22, the filter
offset value must be < 500 (e.g. ± 450)!
If the error occurs in normal mode...
● Check the CAN bus.
● Please contact the Sirona Customer
Actions required
E6 61 04
● Check the CAN bus.
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
or diaphragm unit if necessary.
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
or diaphragm unit if necessary.
in the
f
menu. If the value is < -500 (e.g. -502),
repeat the adjustment of the pan
symmetry and check the position of the
diaphragm.
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
5 Messages
5.5 List of error messages
see
S. [ → 62],
S. [ → 169],
S. [ → 429],
S. [ → 404]
see
S. [ → 62]
S. [ → 169],
S. [ → 429],
S. [ → 404]
see
"Reset values"
S. [ → 163],
S. [ → 62]
see
S. [ → 163],
S. [ → 62]
135