S017: Test Step 13 - Sirona Orthophos XG 3D Ceph Service Manual

8 Perform service routines via the control panel
8.14 S017: Configuration service
314
8.14.8

S017: Test step 13

Enable/disable the welcome screen
Selection field
01
* Factory setting
1. Call service routine S017.13.
Once the service routine has been selected, the code for the
current setting is displayed in selection field 1.
2. Use arrow keys (A) to select the required setting in selection field 1
(see table).
Once the required setting has been selected, the Memory key (B)
lights up.
3. Save the setting [ → 262].
4. Exit the service routine [ → 262].
Service Manual ORTHOPHOS XG 3D / Ceph
Code Function
00 Welcome screen disabled
01 Welcome screen enabled*
Sirona Dental Systems GmbH
63 03 510 D3352
D3352.076.03.11.02 09.2016