Operation; Configuration (Cerec Mc Xl Premium Package) - Sirona CEREC MC XL Premium Package Operating Instructions Manual

6 Operation
6.1 Configuration (CEREC MC XL Premium Package)
36
6

Operation

CAUTION
Risk of injury on calibration pins/instruments
If you reach into the processing chamber (e.g.: when inserting/removing
a ceramic block, changing instruments, or inserting/removing a
calibration phantom), you may injure your hand on the calibration pins/
instruments.
Be careful not to brush against the calibration pins/instruments with your
hand.
Always insert your hand in the processing chamber underneath the
calibration pins/instruments.
6.1
Configuration (CEREC MC XL Premium
Package)
"Devices"
In the
be subsequently modified.
"Configuration"
1. Click the
2. Click on the
3. Click on the unit that you wish to configure.
CEREC MC XL Premium Package
You can subsequently edit the following settings via the menu item
XL"
:
● Name
● Connection settings
– Retrieve IP settings automatically
– Specify IP settings manually
● Manual block fixing
– If you use manual block fixing, a check mark must be placed in
"Manual Block Chuck"
front of
– Models can only be milled using manual block fixation.
● Second motor set
– The check mark must be placed in front of
– You can deactivate instrument sets individually. A deactivated
instrument set is ignored during processing, calibration, etc.
NOTICE! The restoration may become damaged if longer
instruments are present in the deactivated instrument set than in
the active set. Ensure that the instruments installed in the
deactivated instrument set are not longer than those in the active
set.
Operating Instructions CEREC MC XL Premium Package
"CEREC SW"
area of the
button in the system menu.
"Devices"
button.
.
Dentsply Sirona
software, various settings can
"MC
"Two Bur Sets"
.
63 98 536 D 3439
D 3439.201.06.10.02 10.2017