Software Update - Sirona SIROLaser Advance Operating Instructions Manual

Dental lasers
Hide thumbs Also See for SIROLaser Advance:
Table of Contents

Advertisement

Available languages

Available languages

Sirona Dental Systems GmbH
Operating Instructions SIROLaser Advance
63 74 198 D3545
D3545.201.06.03.02 05.2014
NOTICE
The set-up of the key user is fixed and not changeable, but to give him
a user name (e.g. SMITH instead key user) and to change the pin code
2 9 7 4.
The key user is the administrator of the SIROLaser Advance and has all
rights to create and configurate five new users as well as to remove
them from the list of users.
The additional users will have access only to limited parts of the Set-up:
Language, display setting, sound volume, history file, finger or foot
switch, battery calibration.
The configuration for the selection finger or foot switch, and the screen
and volume settings are not stored individually.
If key user presses the 'new' button on user parameters screen a blank
file is opened.
➢ To enter the name, pin code and other settings of the new user press
the appropriate buttons.
The key user decides if this user will be allowed to change preset
applications.
NOTICE
If 'no' is entered there will be no My Settings screen for this user.
The key user decides if this user will have a power limit for treatments. If
yes is entered the key user also enters the power limit in watt.
NOTICE
The power limit directly influences the number of applications that can
be used by this user.
For example, when you choose a power limit of 2 W the user can not
choose preset indication with more than 2 W. If the power limit 0.5 W
(default) so the user has no access to preset indications.
The key user is able to select the applications this user is allowed to use.
NOTICE
The non-usable applications due to the direct selection or the power limit
appear shaded and are disabled.

Software update

5.5.4.7
If a software update of the SIROLaser Advance is needed please proceed
as follows:
1. Choose in main menu the item "Set-up".
2. Choose there the item "Software update" (these can be found on the
second sheet).
3. Follow the instructions in the note message and insert the USB stick.
Operation
Main home screen
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents