S017: Configuration Service - Sirona Orthophos XG 3D Ceph Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
SR*
S017
S017.2
S017.3
S017.4
S017.5
S017.6
S017.8
S017.12
S017.13
S017.14
S017.15
S017.17
S017.18
S017.21
63 03 510 D3352
D3352.076.03.11.02 09.2016
8.14

S017: Configuration service

SA** Function
S017 XG 3D
Unit configuration
yes Configuring the hardware version
yes Enter the country group code
yes Select a language
yes Select a language set
yes Enable/disable the remote control
yes Selecting the kV/mA level series
yes Preview image, enable/disable
yes Enable/disable the welcome screen
yes Enable/disable certain lines of the welcome screen
yes Activate/deactivate the acoustic signal for end of exposure
yes Trigger save/restore function for DX61 data
yes Activation of the occlusal bite block function (for occlusal bite block only)
NOTICE! This service routine may be selected only for units with an
occlusal bite block; otherwise, the unit will malfunction!
yes Configuration of angle pre-selection (temporomandibular joint) for the
TM1 and TM2 user programs
* SR=service routine, ** SA=security access
8 Perform service routines via the control panel
8.14 S017: Configuration service
303