Laying Of Cables When Replacing The Ring Motor; What Has To Be Done After Replacing The Ring Motor (M1_3)/Pinion - Sirona Orthophos XG 3D Ceph Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
63 03 510 D3352
D3352.076.03.11.02 09.2016
9.3.3

Laying of cables when replacing the ring motor

Laying cables for ring motor replacement: XG 3D
1. Lay the cable (G) in a loop from top to bottom and fix it in the cable
clamp (J).
2. Plug connector X813 (H) into board DX1.
9.3.4 What has to be done after replacing the ring motor
(M1_3)/pinion?
1. Check the function of the ring motor.
2. Perform complete unit adjustment or calibration [ → 184].
9 Repair
9.3 Ring motor (M1_3)
383