Laying Of Cables When Replacing The Actuator; What Has To Be Done After Replacing The Actuators - Sirona Orthophos XG 3D Ceph Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
63 03 510 D3352
D3352.076.03.11.02 09.2016
9.4.2

Laying of cables when replacing the actuator

➢ Lay the cables in a loop and secure the loop with the cable ties (A).
9.4.3

What has to be done after replacing the actuators?

1. Check the function of the actuators.
2. Perform complete unit adjustment or calibration [ → 184].
9 Repair
9.4 Pan actuators (M1_1/2)
385