Location 81, Zz=51-78: Board Dx81, Ceph Slot - Sirona Orthophos XG 3D Ceph Service Manual

5 Messages
5.5 List of error messages
Error code Description
E5 81 28 Pan: Invalid data at start of
exposure
Error code Description
E6 81 51 Ceph: General error during module
initialization
Error code Description
E6 81 52 Ceph: Invalid system data or
uninitialized module storage data
Error code Description
E6 81 53 Ceph: Invalid commanding or
control data
This error may also occur in
connection with other causal error
messages! Please also observe the
causal error message! It appears
only after you acknowledge the first
error message.
146
Actions required
E5 81 28
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Run software update.
● Check the version compatibility of the unit
● Seek advice from the Sirona Customer
5.5.12

Location 81, zz=51-78: Board DX81, ceph slot

Actions required
E6 81 51
● Please contact the Sirona Customer
● Check ceph sensor (replacement sensor),
Actions required
E6 81 52
● Please contact the Sirona Customer
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Check ceph sensor (replacement sensor),
Actions required
E6 81 53
● Check the CAN bus.
● If the error is a software error known to the
Service Manual ORTHOPHOS XG 3D / Ceph
software and SIDEXIS XG, perform
software update if necessary.
Service Center (CSC) with regard to the
settings/sensor information in the Xab.ini
file.
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
replace if necessary.
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
replace if necessary.
Sirona Customer Service Center (CSC), a
software update (bug fix) must be
performed.
Sirona Dental Systems GmbH
see
S. [ → 62]
see
S. [ → 62]
see
S. [ → 62]
see
S. [ → 163],
S. [ → 62]
63 03 510 D3352
D3352.076.03.11.02 09.2016