Location 42: Remote Control - Sirona Orthophos XG 3D Ceph Service Manual

Sirona Dental Systems GmbH
Service Manual ORTHOPHOS XG 3D / Ceph
Error code Description
E6 42 01 General module initialization error.
Error generated during module self-
test.
Error code Description
E6 42 02 Invalid system data or uninitialized
module storage data
Error code Description
E6 42 03 Invalid commanding or control data
This error may also occur in
connection with other causal error
messages! Please also observe the
causal error message! It appears
only after you acknowledge the first
error message.
Error code Description
E6 42 04 Data transfer error or dialog error to
module (master side)
63 03 510 D3352
D3352.076.03.11.02 09.2016
5.5.9

Location 42: Remote control

Actions required
E6 42 01 XG 3D
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
● Replace board DX42.
Actions required
E6 42 02
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
● Acknowledge error and repeat procedure.
If the error occurs repeatedly ...
● Replace board DX42.
Actions required
E6 42 03
● Run service routine S008.2 to check
software version of DX42 (in relation to
main software releases), perform software
update if necessary.
● Check the CAN bus.
● Check the signal path from board DX1 to
board DX42, replace module DX42 if
necessary.
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
Actions required
E6 42 04
● Check the CAN bus.
● Please contact the Sirona Customer
Service Center (CSC) to find out whether
a bug fix by means of a software update is
possible and perform such an update if
necessary.
5 Messages
5.5 List of error messages
see
S. [ → 62],
S. [ → 429]
see
S. [ → 62]
S. [ → 429]
see
S. [ → 286],
S. [ → 62],
S. [ → 163],
S. [ → 429]
see
S. [ → 163],
S. [ → 62]
131