Technical Data; Terminal Module Cabinet Tmc (Option G63) - Siemens sinamics dcp Operating Instructions Manual

6.5.1.7

Technical data

Table 6- 7 Technical data
Communication Board CBE20
6SL3055-0AA00-2EBx
Max. current requirements (at 24 V DC)
Power loss
Weight
6.5.2

Terminal Module Cabinet TMC (option G63)

The Terminal Module Cabinet (TMC) enables the simple connection of the CUD standard
signals (X177) via spring-loaded terminals in an easily accessible area of the control cabinet.
See Chapter Ordering information for options and accessories (Page 28) for ordering data.
Image 6-16
The CUD is equipped with a "Cabinet Board".
During installation, connectors X1 and X2 on the adapter board must be connected to
connectors X1 and X2 on the TMC with the supplied cables (3 m). The cables must be laid in
a cable duct.
For terminal assignment, see Chapter Image 6-17 Terminal/connector arrangement on the
"Cabinet Board" (Page 67).
SINAMICS DCP
Operating Instructions, 05/2016, A5E34382853K
Unit
A
DC
W
kg
Terminal Module Cabinet
Electrical connection
6.5 Additional system components
Value
0.1
2.4
< 0.1
65