Optional Products; To Change Network Settings; On Windows Xp; On Windows 7 - Agilent Technologies 16900 Series Installation Manual

6
Using and Updating the Logic Analysis System
To be notified when software upgrades are available for downloading from
the Web, sign up for e- mail notifications at:
http://www.agilent.com/find/emailupdates

Optional Products

If applicable, follow the instructions on the entitlement certificate that
came with your purchase to enable the optional tool.

To change network settings

To make network changes after the first- time power up:

On Windows XP

The following steps are applicable for a logic analysis system with
Windows XP operating system:
• To change from a workgroup to a domain or vice versa, right- click My
• To change network connection properties, click Start>Control
For more information on changing network settings, refer to the Windows
XP online help.

On Windows 7

The following steps are applicable for a logic analysis system with
Windows 7 operating system:
• To change from a workgroup to a domain or vice versa, click Computer
• To change network connection properties, click Start>Control
104
Computer and select Properties. Select the Computer Name tab and
click Change.
Panel>Network Connections. Select the connection you want to change
and click Change settings of this connection.
and select Properties. Click the Change Settings link in the Computer
name, domain and Workgroup settings section. Then select the
Computer Name tab and click Change.
Panel>Network and Sharing Center. Select the connection you want to
change and then set the properties of this connection.
16900 Series Logic Analysis Systems Installation Guide