3) Removing Lower Unit
Removal of lower unit does not require removal
of power unit from outboard motor body.
1.
Remove spring pin and disconnect shift rod.
• Disconnect shift rod at lower side of shift rod
joint 1.
• Use spring pin tool A 2 to remove spring pin.
• Do not reuse removed spring pin.
Spring Pin Tool A 2:
345-72227-0
2.
Remove lower unit installation bolts, and pull lower unit ass'y
downward to remove.
4) Disassembly of Water Pump
Remove pump case (Upper) 1.
1.
Remove impeller 2.
2.
25/30 2006
2
1
a
2
a
a
a Projection b Hole
1
6
b
6-9