Water Separator Inspection And Service - TOHATSU BFT 150A Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
Water Separator Inspection and
Service
INTAKE MANIFOLD
WATER SEPARATOR
The water separator is located below
the intake manifold. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized TOHATSU dealer for
cleaning.
78
Gasoline is highly flammable and
explosive.
You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat,
sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
1. Remove the engine cover (p. 62).
2. Remove the separator assembly. If
it is difficult to remove the
separator assembly by yourself,
consult an authorized TOHATSU
dealer.
FUEL TUBES
SEPARATOR
ASSEMBLY
SUSPENSION STRAP
Remove the suspension strap from
the water separator bracket; then
remove the strap from the separator
assembly.
During removal of the separator
assembly, take care not to damage
the wire harness with the separator
bracket.
3. Pinch the fuel tubes with tube
clamps to prevent fuel leakage.