Compartment, - Beckman Coulter LH 780 Instructions Manual

REPLACEMENT PROCEDURES
REPLACING CASSETTE LABELS
L Close the Bath Compartment
M Press
N Run a Control in CBC Test Mode
3.3 REPLACING CASSETTE LABELS
Replace worn or damaged cassette labels as needed.
L a b e l
a l i g n m e n t
m a r k e r
3-6
START UP
C a s s e t t e
a l i g n m e n t
m a r k e r
C a s s e t t e
b a r - c o d e
l a b e l
C a s s e t t e
I D l a b e l
1. Remove the old label
completely.
2. Use the label alignment
marker only to orient the new
label in the label cutout on
the cassette.Place the label in
the label cutout area,
positioned to the bottom of
the cassette and centered left
to right in the cutout.
3. Ensure that the bar-codes on
the label are centered on the
sample tube positions.
4. Ensure you match the cassette
T h e c a s s e t t e b a r c o d e number on the bar-code label
l a b e l s h o u l d b e p o s i t i o n e d
with the cassette ID label on
t o t h e r e a r o f t h e c u t o u t
the cassette.
a n d c e n t e r e d l e f t t o r i g h t
PN 773023AC