Scanner, - Beckman Coulter LH 780 Instructions Manual

ADJUSTMENT PROCEDURES
CONFIGURING HANDHELD SCANNER
4.11 CONFIGURING HANDHELD SCANNER
Configuring the Handheld Scanner
By default, your handheld scanner contains the following configuration:
Option
Language Code Settings
Automatic tab to next field
Code 39
Code I-2 of 5 (AIM
Codabar
Code 128
View below and print the bar-codes used to configure additional options such as Keyboard
Language Code Settings, Reset to Beckman Coulter, Inc. Defaults, Code 39, Interleaved
2-of-5, Codabar, and reagent container labels. When you hear two beeps, the scanner has
accepted the configuration information.
4-8
Default
English
Enabled
Enabled
Check Character: Enabled; Do not transmit
Minimum character length: 03
Maximum character length: 16
Start/Stop character: Do not transmit
® Enabled
)
Check Character: Enabled; Do not transmit
Minimum character length: 03
Maximum character length: 15
Enabled
Check Character: AIM Checksum Algorithm Enabled;
Do not transmit
Minimum character length: 03
Maximum character length: 16
Start/Stop character: Do not transmit
Enabled
Check Character: Enabled; Do not transmit
Minimum character length: 03
Maximum character length: 16
PN 773023AC