Beckman Coulter LH 780 Instructions Manual page 8

CONTENTS
2.17 ADVANCED BAR-CODE
Positioning the Advanced Bar-Code
Up - Service Position
Down - Read Position
2.18 CLEANING VACUUM ISOLATOR CHAMBER
Summary, 2-37
A Prepare VIC for
B Bleach
C Return VIC to Working
D Shut Down Your
E Start Up Your
2.19 CLEANING WASTE
Summary, 2-39
A Prepare Waste
B Bleach Waste
C Return Waste Chamber to Working
2.20 CLEANING THE SHEAR
2.21 CLEANING THE STRIPPER
3 REPLACEMENT PROCEDURES, 3-1
3.1 REPLACING AIR
Procedure, 3-1
For Analyzer, 3-1
For Power
3.2 REPLACING AN APERTURE
Summary, 3-2
Procedure, 3-3
A Press Until the Aperture Baths Drain Completely into the Waste
B Press
C Turn Off the Main Breaker on the Power
D Disconnect the Primary Power
E Unhook the Bath Springs and Gently Pull the Bath Out of the
F Label and Disconnect the Tubing Attached to Left Side of the Aperture
G Replace the O-Rings on the Aperture Block if You Have Spare O-rings
H Replace the Aperture Bath and Reconnect
I Reconnect the Primary Power
J Turn on the Main Breaker on the Power
K Check for Leaks and Air
L Close the Bath
M Press
N Run a Control in CBC Test
3.3 REPLACING CASSETTE
3.4 REPLACING CASSETTE SPRING
viii
READER, 2-34
Reader, 2-36
, 2-36
, 2-36
Cleaning, 2-37
VIC, 2-38
Order, 2-38
System, 2-38
System, 2-38
CHAMBER, 2-39
Chamber, 2-39
Chamber, 2-41
VALVE, 2-41
PLATE, 2-44
FILTERS, 3-1
Supply, 3-1
BATH, 3-2
, 3-3
Bubbles, 3-5
Compartment, 3-6
, 3-6
Mode, 3-6
LABELS, 3-6
CLIP, 3-7
(VIC), 2-37
Order, 2-41
Supply, 3-3
Cord, 3-3
it, 3-5
Cord, 3-5
Supply, 3-5
Chamber, 3-3
Instrument, 3-4
Bath, 3-4
Available, 3-4
PN 773023AC