Valve, - Beckman Coulter LH 780 Instructions Manual

F Install the Tubing and New Pinch Valve
ROD
TRANSIT
CLIP
PN 773023AC
I-BEAM TUBING
REPLACEMENT PROCEDURES
REPLACING PINCH VALVES
1. Use a red shipping clip to hold open the
valve.
2. Thread the I-beam tubing through the
valve.
3. Remove the red shipping clip.
4. Line up the valve to start the 1/4-turn
twist based on where you want the valve
to end.
5. Using the pinch valve wrench, push in
and turn the valve until it seats.
6. Attach the tubing to the fittings.
3
3-23