Section 7 Voice Tx Function; Voice Tx Function; Drecording The Voice Audio - Icom ID-52A Advanced Manual

7

VOICE TX FUNCTION

Voice TX function
The Voice TX function transmits the recorded audio
that is on the microSD card, one time or repeatedly,
for up to 10 minutes at the set interval�
This function is convenient to repeatedly call CQ, or
for other events�
You can assign the [Voice TX] key function to an
optional microphone key or optional Bluetooth
headset� (pp� 12-18, 12-34)
NOTE: BE SURE to insert a microSD card into the
transceiver�

DRecording the voice audio

[MENU] > VOICE > Record
1� Push [MENU]�
2� Select "VOICE�"
3� Select "Record�"
4� Hold down [PTT] to record�
Displayed
while
recording
L Information
• Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from
your mouth, then speak at your normal voice level�
• The maximum record time is 1 minute�
• Only 1 voice memory can be recorded�
TIP: On the VOICE TX RECORD screen,
push [QUICK], then select "Clear" to clear the
recorded audio�
5� Push [ENT] to confirm the recorded voice�
• The voice is played back�
Displayed
while playing
L If you hold down [PTT], the recording starts again�
In this case, the previous recorded audio will be
overwritten�
L To exit the MENU screen, push [MENU]�
7-2
Recording time
Audio level
Total time
Play back time