Voice Tx Memory Function; Recording A Voice Tx Memory; D Recording; D Playing Back - Icom IC-9700 Advanced Manual

3. VOICE TX MEMORY FUNCTION

Recording a Voice TX memory

You can record up to 8 Voice transmit memories (T1 ~
T8) of up to one and a half minutes in each memory,
onto an SD card. To transmit a recorded content using
a Voice TX memory, first record the message, as
described below.
L You can record up to 1 and a half minutes in each
memory.
L A user supplied SD card is required to use the Voice TX
memory function.
L You can also transmit the recorded content using an
external keypad.

D Recording

1. Display the VOICE TX screen in the SSB, AM, FM
or DV mode.
» VOICE
MENU
2. Touch [REC/SET].
3. Touch the "REC" item.
• Opens the VOICE TX RECORD screen.
4. Select the desired Voice memory "T1" ~ "T8."
(Example: T1)
5. Touch to start recording.
• Without holding down [PTT], speak into the
microphone at your normal voice level.
L Previously recorded content is overwritten.
While Recording
6. Touch to stop recording.
7. To close the VOICE TX screen, push
times.

D Playing back

1. On the selected memory's recording screen,
touch to start playing back without
transmitting.
LTo stop the playback, touch
While playing
2. To close the VOICE TX screen, push
times.
TIP: How to clear the recorded content
Touching the Voice memory for 1 second in step 4
to the left, and then touch "Clear" in the Quick
menu.
3-1
Adjust the Mic
gain so that the
"REC Level"
meter reads less
than 80%
Touch to open
the MIC GAIN
adjustment
window
several
EXIT
.
several
EXIT