Voice Tx Function; D Recording; D The Recorded Voice Audio Playing Back - Icom ID-51A Advanced Manual

Previous view
17
OTHER FUNCTIONS

■ Voice TX function

The Voice TX function transmits the recorded audio on
a microSD card once, or repeatedly, for up to 10 min-
utes at a specified interval.
TIP: When the key function [Voice TX] is assigned
to the key on the optional HM-75LS
, the voice audio recorded onto the microSD
phone
can be transmitted when the key is pushed.
NOTE: Be sure to insert a microSD card to the trans-
ceiver's [micro SD] slot before starting to record a
voice audio.

D Recording

q Push [MENU] .
w Push D-pad( ) to select the root item ("Voice TX"),

and then push D-pad(Ent).
D-pad
(Ent)
( )
e Push D-pad( ) to select "Record," and then push D-

pad(Ent).
r Push [PTT] to start recording.
• After releasing [PTT], the recording is cancelled.
• The maximum record time is 1 minute.
• Hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth, then speak at your normal voice level.
• Only one announcement can be recorded. The current
contents will be overwritten if you record again.
t Push [MENU] to exit the MENU screen.

D The recorded voice audio playing back

The recorded voice audio for the Voice TX function can
be played back.
q Push [MENU] .
w Push D-pad( ) to select the root item ("Voice TX"),

and then push D-pad(Ent).
e Push D-pad( ) to select "Record," and then push D-

pad(Ent).
r Push D-pad(Ent) to start the playback.
t Push [MENU] to exit the MENU screen.
When no microSD card is inserted:
When no microSD card is in-
serted, this error message is
displayed.
- -
speaker micro
TIP: You can delete the recorded audio.
➥ On the DV AUTO REPLY screen, push [QUICK]
17-2
, and then push D-pad(Ent).
While recording
Audio level is displayed
Recording time
is displayed
While playing back