Auto Position Reply Function; Voice Tx Function; Speech Function; Resetting - Icom ID-51A Basic Instructions

New2001 New2001
NEW!

Auto Position Reply function

When you receive a call addressed to your own call sign, but
ceiver, this function automatically replies with your own call
sign and transmits your position.
w Your position is auto-
matically transmitted.
q A call addressed to
your own call sign.
Your station
NEW!

Voice TX function

You can transmit recorded audio once or repeatedly, which is
useful for D-STAR events.
This is JA3YUA
JA3YUA
NOTE: This function requires a microSD card.
New2001
14

RESETTING

Resetting
The display may occasionally display erroneous information
(for example when first applying power). This may be caused
externally by static electricity or by other factors.
If this problem occurs, turn OFF power.
After waiting a few seconds, turn ON power again. If the prob-
lem persists, perform a Partial reset or an All reset.
A Partial reset resets operating settings to their default values
(VFO frequency, VFO settings, menu contents) without clear-
ing the items below:
BE CAREFUL! An All reset clears all programming and
returns all settings to their factory defaults. See the PDF
type Advanced Instruction for more details.
-
Destination
e After receiving, the
(ID-51)
screen shows the
position.
Repeat Voice TX
waiting screen
INTRODUCING NEW FUNCTIONS
NEW!

Speech function

Hold down [SPCH] for 1 second to audibly announce the
displayed frequency and operating mode, or call sign.
at the display.
See the PDF type Advanced In-
struction for details.
Home CH beep function
[DIAL] speech function
Mode speech function
NEW! Temporary Skip function
a scan, for a set period.
<While scanning>
Unwanted frequency
D Partial reset
q Push [MENU] to enter
the Menu screen.
Push D-pad( !) to select the
w
root item (Others), and then
push D-pad(Ent) to go to the
next level.
D-pad
(Ent)
( )
( MENU > Others > Reset >
Partial Reset)
Refer to the menu sequence
e
shown directly above and
push D-pad(!) to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
13
13
48
New2001
Go to step r